RIDENOW 36G TPU INNER TUBE SV85

Before inflating the RideNow tube, turn the valve inward (towards the center of the tire circle). Inflate a small amount until the inner tube is round; this

pressure should be less than 0.5 bar/8 PSI.

Tire inflation pressure must not exceed 5 bar/72

PSI When using rims with a no-ring-lip system according to ISO/TC 31.

Every 3° (5°F) increase in temperature would increase the tire pressure by about 1%.

If you inflate the tires in a cool garage in the morning (18°C / 65°F) and ride later at higher ambient temperatures (35°C / 95°F), it may result in an increase in inner tube pressure (e.g. 0.5 bar/8 PSI).

Especially when riding on high temperature black asphalt pavement with temperature exceeding 65°C (150°F), the tire pressure may easily exceed the allowable maximum value. In addition, too high tire pressure can cause the tire to break away from the rim during cycling, which can result in the risk of injury.

If pneumatic tires are stored at 60°C (140°F) or higher (e.g. in a car in hot weather), deflate the inner tube to 1 bar/15 PSI to avoid valve deformation.

Size : 700 x 18/32c Recommended scope of application

Material TPU

Weight 36g

Valve length French 65mm

Size: 1.1-1.5 Recommended scope of application

Material TPU

Weight 20g

Valve length French 85mm

Due to the special TPU material, the durability is also greatly improved compared with traditional inner tubes. The ultra-light weight is only 38g, which is about 100g less than the traditional butyl inner tube, and a pair saves 200g.